![Go-Power-Dometic_logo_vertical_Black_CMYK.png]](https://support.gopowersolar.com/hs-fs/hubfs/Go-Power-Dometic_logo_vertical_Black_CMYK.png?height=50&name=Go-Power-Dometic_logo_vertical_Black_CMYK.png){kind=logo}
IC-3000-12-PKG / IC-2000-12-PKG / Inverter Charger/ How to : Final Inspection
1. Verify all cables/conduit runs are secured with zip ties or other non-conductive cable clamps to prevent damage from vibration.
2. Ensure all cables that pass-through walls, bulkheads, or any other openings are protected against abrasion by using strain reliefs and/or grommets.
3. Check all AC, DC and ground connections are securely tightened, and if required, covered with suitable anti-seizing grease.
4. Check the AC terminal connection cover plate has been securely re-attached.
5. Check all connections are secure in the main and sub panels. Replace all covers.
6. If required by code, have the installation inspected by an electrical inspector.
2. Ensure all cables that pass-through walls, bulkheads, or any other openings are protected against abrasion by using strain reliefs and/or grommets.
3. Check all AC, DC and ground connections are securely tightened, and if required, covered with suitable anti-seizing grease.
4. Check the AC terminal connection cover plate has been securely re-attached.
5. Check all connections are secure in the main and sub panels. Replace all covers.
6. If required by code, have the installation inspected by an electrical inspector.