SW Inverter 1500TS: Remote Control Green Terminal
Mar 17, 2020
2330
| PIN # | PIN Assignment |
| 1 | GND |
| 2 | -ENB |
| 3 | ENB |
| 4 | No Use |
| 5 | No Use |
Remote control green terminal (1) may be connected to a Form C relay for “FAULT” indication. When “FAULT” occurs, the relay switches.
• Before installing the inverter, please ensure that the main switch is in the OFF position.
• Before using the remote control terminal, please ensure the main switch is in the REMOTE position.
• Use 20 ~ 24 #AWG wire to connect the remote control terminal. • Remote control ON/OFF inverter setup status.
