SOLAR CONTROLLER OPERATING INSTRUCTIONS

1) Automatic cycle interface

Display: PV voltage, PV current, PV power, Battery voltage and Battery temperature

2) Clear the generated energy

Operation: Step 1: Press the “SET” button and hold 5s under the PV power interface and the value is flashing.

Step 2: Press the “SET” button to clear the generated energy

3) Battery type

+ Battery type

Sealed Gel Flooded User(1)

+ Set battery type by LCD(1)

Operation:

Step 1: Press the “SET” button and hold 5s under the battery voltage interface.

Step 2: Press the “MENU” button when the battery type interface is flashing.

Step 3: Press the “SET” button to confirm the battery type.