Skip to content
English
Go to gopowersolar.com
  • There are no suggestions because the search field is empty.

AE-4/ AE-6/ GP-CEP/ All Electric solar Kits/How to/ Cable Entry Plate(s) Installation

1. Remove the sealing caps from the ends of the MC4 connectors in the CEP(s).

2. For the SOLAR-AE6 kit, connect the positive and negative connectors from one string of solar panels to the CEP. Connect the second string of solar panels to the second CEP. (See Figure 5-E).

3. For the SOLAR-AE4 kit, connect the positive and negative connectors to the CEP. (See Figure 5-F).

4. Recall from the planning section that it may be necessary to use the provided 3’ or 10’ solar extension cables for this step.