You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Testing Branch Connectors
print icon

Branch Connector Testing

Perform a continuity test across the branch connectors with a multimeter.

Set a meter to measure resistance.  Place probes across the connector. As per the above image.

Resistance should be minimal anything above what is shown in the image may be an issue with the connector.

Repeat the test with the apposing side of the connector as per the image above.  No resistance means the connector is working correctly.

0 out of 0 found this helpful

scroll to top icon