WARNING: Turning the unit OFF does not disconnect the batteries or AC power source. Therefore, the “AC output
load” is still active.

 

 

 

CAUTION: This Inverter does not include any output circuit breakers. So 20A branch-rated circuit breakers must be
installed in the inverter’s output wiring (breaker panel).

 

 

 

 

CAUTION: The Inverter’s internal transfer AC transfer relay is rated for 50 amps per leg. The pass-through current
must be no greater than 50 amps per leg or damage to the relays and/or the input circuit breakers may occur.