GP-RVC-R - MOUNTING TEMPLATE
![][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2024/02-12/1c05bc70-d343-48b6-bf3a-c54100b58957/image-20240212122645-1.png
GP-RVC-R - LIMITED WARRANTY
Go Power! warrants the GP-RVC-R for a period of five (5) years from the date of shipment from its factory. This warranty is valid against defects in materials and workmanship for the five (5) year warranty period. It is not valid against defects resulting from, but not limited to: • Misuse and/or abuse, neglect or ac…
GP-RVC-R - APPEARANCE
![][1] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpgopower_kb_attachments/2024/02-12/1c8c224a-6c1c-400b-829b-c8eb8ebbcdfd/image-20240212103657-1.png
GP-RVC-R - PARALLEL CONTROLLER STATUS
**Device Status Screens** The information below outlines how to navigate the status screens of the RVC Remote in a system with multiple GP-RVC-30-MPPT controllers connected to the same battery bank in parallel. These instructions are intended to assist with using the remote prior a pending update to the manual that …
GP-RVC-R - USER INTERFACE
**STARTUP SPLASH SCREENS** The following splash screens are displayed when the controller/remote display are first powered on. [MENU 1]: RVC-DISPLAY Establishing connection with the controller (this interface only exists for a very short time) [MENU 2]: RVC-DISPLAY startup, displays Go Power! ![][1] 1. Main Scre…
GP-RVC-R - INSTALLATION
The GP-RVC-R is intended to be mounted to an interior wall so the status of the solar controller can be viewed. Tools and Materials Needed: • Philips screw driver • Drill • 1” diameter drill bit or hole saw Installation Steps: _THIS REMOTE DISPLAY CAN BE MOUNTED USING THE FOLLOWING STEPS._ 1. Plan the location …
GP-RVC-R - CHARGE STATES AND FAULTS
The main screen has a section at the bottom (indicated in the images below) to indicate either charge state if the controller is charging normally or fault information if the controller has entered a fault state. All of the possible charge states and fault states are listed in the table below. The actual value display…
GP-RVC-R - STATUS, SETTINGS AND COMMANDS
The following table lists all of the status parameters, settings and commands that are available on the controller via the remote display and the Go Power! Connect mobile application. The actual value displayed may be prefaced with “Batt1” or “Batt2” if the remote display is connected to a GP-RVC-MPPT-30 controller si…
GP-RVC-R - BLUETOOTH® WIRELESS TECHNOLOGY
The GP-RVC-R comes with Bluetooth® wireless technology for live status monitoring and settings configuration on mobile devices. It works together with the Go Power! Connect App, available for both Android and iOS devices. Download and install the Go Power! Connect app, which is available on the Google Play store for …
GP-RVC-MPPT-30 - PARALLEL CONNECTION WIRING
# WIRING DIAGRAM ![][1] [1]: https://gpelectric.com/wp-content/uploads/2021/10/Parallel-Charging-Full-System-e1651163982882.png
