IC Series Inverter Charger: DC CABLE CONNECTIONS
# DC CABLE CONNECTIONS DIAGRAMS When installing the battery cable ring lug onto the Inverter/Charger DC terminal and the battery post, do not put anything between the ring lug and the metal surface. Incorrectly installed hardware causes a high resistance connection which could lead to poor Inverter/Charger performanc…
IC Series Inverter/Charger: AC WIRING
# AC WIRING INSTRUCTIONS The AC cables link the Inverter/Charger to the main panel and the sub panel. These cables handle the incoming alternating current (AC) utility or generator power, which can be passed through the Inverter/Charger to directly power the main appliances (pass-through mode) and/or used to charge t…
IC Series Inverter/Charger: AC CONDUCTOR WIRING
![][1]Make sure the IC Series is fully disconnected from the battery bank and no AC power is connected to the Inverter/Charger before commencing any AC wiring connections. Tighten terminal blocks on both sides periodically to correct torque specs. AC INPUTS WIRING (50A Dual IN, Dual Out Configuration) * Remove th…
IC Series Inverter/Charger: DC WIRING
# DC WIRING The cables linking the Inverter/Charger to the battery bank are the DC cables. These cables handle the Direct Current power used to charge the batteries (Charging Mode) and power the main appliances (Inverter Mode). It is important to select the correct wire size and to provide adequate over-current prote…
IC Series Inverter/Charger: WIRING THE INVERTER/CHARGER TO THE BATTERY BANK
![][1]**WARNING**: Lethal currents will be present if the positive and negative cables attached to the battery bank touch each other. During the installation and wiring process, ensure the cable ends are insulated or covered to prevent shorting the cables. ![][1]**WARNING**: DO NOT connect the DC Wires from the batte…
IC Series Inverter/Charger: GROUNDING THE INVERTER - AC GROUNDING
# HOW TO GROUND THE INVERTER The IC Series Inverter/Charger should always be connected to a permanent, grounded wiring system. An Inverter/Charger system that is properly grounded will reduce the risk of electric shock, and reduce radio frequency noise. The main aim of any grounding system is to provide a well define…
How to wire an Inverter Charger in an RV
# How to wire an Inverter Charger in an RV Is there a "right" way to wire your IC Series inverter charger? In this video Sean demonstrates how to safely connect your charger and talks about why checking those connections on a regular basis helps prevent potential performance issues. Click here for the video:
